JVC DT-3D24G1U DT-3D24G1U Operation Manual - Page 9
D CURSOR button/lamp, SCREENS CHECK button/lamp
View all JVC DT-3D24G1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
5 MUTING button Turns off the sound when no menu screen is displayed (Muting). ● To cancel the function, press the button again or turn the VOLUME adjustment knob. ● Muting function is also canceled when "BALANCE" of "AUDIO SETTING" in the MAIN MENU is changed (→ page 21). 6 / / / buttons When a menu screen is displayed Selects or adjusts menu items (→ "Menu Operations" on page 18). When no menu screen is displayed Selects the audio channels of EMBEDDED AUDIO signals (→ "Audio Channel Selection" on page 10). ● Pressing button while holding button displays the SET-UP MENU (→ "Menu Operations" on page 18). 7 MENU button Activates/deactivates the display of the MAIN MENU (→ "Menu Operations" on page 18). 8 COLOR OFF button/lamp Displays only the luminance signal. ● This function does not work for RGB input signals. 9 1:1 button/lamp Displays the picture in the original resolution of the input signal. ● The aspect ratio of the picture may change depending on the input signal. p MARKER button/lamp Displays/Hides the area marker/safety marker. ● Configure the setting in "MARKER" of the MAIN MENU (→ page 20). ● Available when both the 3D and MIX modes are "OFF." ● Not activate when picture is displayed in the 1:1 mode. ● The area marker can only be displayed in 16:9 display mode. q 3D CURSOR button/lamp Displays/Hides the cursor for measuring the visual difference during 3D display (→ page 16). ● Each time you press this button, the display mode changes in the following order. No display Cursor mode Grid mode w SCREENS CHECK button/lamp Displays only the selected element (R, G, or B) of the video signal. ● This function does not work for RGB input signals. ● Each time you press this button, the picture changes in the following order. RGB (Normal screen) Red screen Blue screen Green screen e SCOPE button/lamp Displays/hides the indication of the wave form monitor and vector scope (→ "SCOPE SETTING" on page 22). ● Each time you press this button, the window changes in the following order. • When the MIX mode is "OFF" or invalid No display Wave form monitor Vectorscope • When the MIX mode is "ON" (→ page 16) No display Parallel wave form monitor Parallel vector scope Difference wave form monitor Difference vector scope r T.C. (time code) button/lamp Activates/deactivates the display of the time data (time code) contained in the SDI signal (→ "On the Information Display" on page 10). ● Select the time code type in "INFORMATION" of SET-UP MENU (→ page 24). t SELECT button Selects/Changes items. Used for the following item/function. • 3D format (→ page 19) • 3D cursor (→ page 16) • INDIVIDUAL (→ page 15) y 3D button/lamp Activates/Deactivates the 3D mode. ● Corrects images for 3D viewing with circular polarizing glasses. u CAMERA ASSIST button/lamp Displays/Hides the CAMERA ASSIST MENU (→ page 14). ● Only works for images available in MIX mode. i MIX button/lamp Activates/Deactivates the MIX mode. ● Mixes L and R images and converts to side-by-side images (→ page 13). o INPUT SELECT buttons/lamps Selects an input. SDI 1/L: Input from the E. AUDIO 3G SDI/HD SDI/ SDI 2/R: SD SDI (IN 1/L) terminal Input from the E. AUDIO 3G SDI/HD SDI/ DUAL LINK: SD SDI (IN 2/R) terminal Input from the E. AUDIO 3G SDI /HD SDI/ SD SDI (IN 1/L, IN 2/R) terminals DVI: Input from the DVI-D (HDCP) terminal ● The lamp for the selected input lights. ● The SDI 1/L and SDI 2/R lamps light up in MIX mode. (Only the SDI 1/L lights up in 3G SDI LEVEL B Dual Stream input.) ; Power lamp Off: Green: The power is turned off The monitor is on Orange: The monitor is turned off (standby), or the DC power voltage is reduced while working and the monitor is shut down Orange blinking: P.SAVE (Power saving) mode ("NO SYNC ACTION" in "SYNC FUNCTION") (→ page 22) ● You cannot turn on the monitor if the DC power is shut down while the power lamp lights up in orange. Disconnect the DC connector, set up the DC power within the operating range, and then connect the connector again. a button Turns on and off (on standby) the monitor. ● The AC power switch is equipped on the rear panel of the monitor (→ 2 on page 7). 9