JVC DT-3D24G1U DT-3D24G1U Operation Manual - Page 16
Other 3D functions, SCOPE button/lamp, 3D CURSOR button/lamp
View all JVC DT-3D24G1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Other 3D functions SCOPE button/lamp You can display the wave form monitor or vector scope, and compare and check the SDI IN 1/L and SDI IN 2/R input signals. ● Works in MIX mode. The operation to be performed differs in other modes. (→ page 9) ● Each time you press the SCOPE button, the display mode changes in the following order. No display : Does not display the wave form monitor/vector scope. Parallel wave form : Tiles the wave form monitors of the images input into the SDI IN 1/L and SDI IN 2/R terminals. monitor Parallel vector scope : Tiles the vector scopes of the images input into the SDI IN 1/L and SDI IN 2/R terminals. Difference wave form : Select this to display the differential of the signals from the SDI IN 1/L and SDI IN 2/R terminals in monitor wave form monitor. Difference vector : Select this to display the differential of the signals from the SDI IN 1/L and SDI IN 2/R terminals in scope vector scope. Y Y Parallel wave form monitor Parallel vector scope Y Difference wave form monitor Difference vector scope • When the CAMERA ASSIST MENU "LR SWAP" is set to "ON", L and R images of the parallel wave form monitor and vector scope are exchanged and then displayed. • The positions of the wave form monitor and vector scope can be changed in "POSITION" under the MAIN MENU "SCOPE SETTING." • The wave form monitor and vector scope are not displayed in "R SHIFT" or "ANAGLYPH" of the CAMERA ASSIST MENU. • The vector scope is not displayed when the input signals are RGB. 3D CURSOR button/lamp When 3D is "ON", the L and R lines measuring the visual difference between L and R images, and the pixels and percentage between the lines, are displayed. The following two modes are available for the line display: "Cursor mode" and "Grid mode." ● Each time you press the 3D CURSOR button, the line display mode changes in the following order. No display Cursor mode Grid mode ● The information (→ page 10) and SCOPE are not displayed in "Cursor mode" or "Grid mode." ● The positions of the pixels and percentage can be changed in "POSITION" under the MAIN MENU "INFORMATION." Cursor mode The L, R, and H lines appear, which measure the visual difference. ● The H and L lines are fined dotted lines, and the R line a coarse dotted line. The selected line is displayed as a solid line. L line (Group A) R line (Group A) Pixels/Percentage between L and R lines - H line (Group B) H line (Group A) (selected line) R line (Group B) L line (Group B) ● The line color changes when the line goes beyond "FAR LIMIT" or "NEAR LIMIT" under the MAIN MENU "3D SETTING." ● The ratio of the difference between the L and R lines to the horizontal pixels appears in the percentage display. ● In the percentage display, "+" indicates the pop-up level (when the L line is placed on the right of the R line), and "-" the depth (when the L line is placed on the left of the R line). 16