JVC DT-3D24G1U DT-3D24G1U Operation Manual - Page 25

Control Lock, Dvi Input Sel., Sdi Format, All Reset, Ms3ycbcr, Ms2 Rgb, 3g-b-ds

Get JVC DT-3D24G1U PDF manuals and user guides View all JVC DT-3D24G1U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

CONTROL LOCK Setting value: OFF, VOL.LOCK, ALL LOCK Settings for disabling the buttons on the front panel. ● The following operations are not available when "VOL.LOCK" is selected. - VOLUME adjustment knob - Picture adjustment knob ● The "ALL LOCK" function disables to control the buttons on the front panel. But following operations are available. - Turning on/off (on standby) the monitor. - Press the button and button to display the SET-UP MENU, and set "CONTROL LOCK" to "OFF." - Operate this product by external control. When you perform operations other than the above, " Control lock on!" appears. DVI INPUT SEL. Setting value: AUTO, COMPO., RGB, PC Settings for formats of signals input into the DVI-D (HDCP) terminal. ● Automatically distinguishes signals when set to "AUTO." (Normally, select "AUTO") ● Select "COMPO.", "RGB" or "PC" when the picture is not displayed correctly with "AUTO." ● DVI-D input of the monitor is compatible with HDCP. SDI FORMAT Setting value:AUTO, MS1YCbCr, MS2YCbCr, MS3YCbCr, MS4YCbCr, MS2 RGB, MS3 RGB, 3G-B-DS Settings for formats of signals for 3G SDI/HD SDI DUAL LINK input. ● Automatically distinguishes signals when set to "AUTO." (Normally, select "AUTO") ● If the picture is unstable with "AUTO", select the setting value according to the input signal format. ● When "AUTO" is not selected, "M" appears in the status display. all reset Restores all the settings and adjustments of the monitor to the default. ● "HOUR METER" and the settings done by using the adjustment knobs on the front panel will not be reset. ● If reset while the AC power is on, the monitor turns off (standby), and then turns on automatically. ● If reset while the DC power is on, the monitor turns off (standby). 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
25
CONTROL LOCK
Setting value: OFF, VOL.LOCK, ALL LOCK
Settings for disabling the buttons on the front panel.
●
The following operations are not available when “VOL.LOCK” is selected.
– VOLUME adjustment knob
– Picture adjustment knob
●
The “ALL LOCK” function disables to control the buttons on the front panel. But following operations are available.
– Turning on/off (on standby) the monitor.
– Press the
button and
button to display the SET-UP MENU, and set “CONTROL LOCK” to “OFF.”
– Operate this product by external control.
When you perform operations other than the above, “
Control lock on!” appears.
DVI INPUT SEL.
Setting value: AUTO, COMPO., RGB, PC
Settings for formats of signals input into the DVI-D (HDCP) terminal.
●
Automatically distinguishes signals when set to “AUTO.” (Normally, select “AUTO”)
●
Select “COMPO.”, “RGB” or “PC” when the picture is not displayed correctly with “AUTO.”
●
DVI-D input of the monitor is compatible with HDCP.
SDI FORMAT
Setting value: AUTO, MS1YCbCr, MS2YCbCr,
MS3YCbCr, MS4YCbCr, MS2 RGB, MS3 RGB, 3G-B-DS
Settings for formats of signals for 3G SDI/HD SDI DUAL LINK input.
●
Automatically distinguishes signals when set to “AUTO.” (Normally, select “AUTO”)
●
If the picture is unstable with “AUTO”, select the setting value according to the input signal format.
●
When “AUTO” is not selected, “M” appears in the status display.
all reset
Restores all the settings and adjustments of the monitor to the default.
●
“HOUR METER” and the settings done by using the adjustment knobs on the front panel will not be reset.
●
If reset while the AC power is on, the monitor turns off (standby), and then turns on automatically.
●
If reset while the DC power is on, the monitor turns off (standby).