JVC DT-3D24G1U DT-3D24G1U Operation Manual - Page 23
Set-up Menu, Function Setting, Picture Sub Adj., H Position Adj., White Balance Set.
View all JVC DT-3D24G1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
SET-UP MENU FUNCTION SETTING Configure the sub menu display, the lighting color of the tally lamp, the size of images, the brightness of the button lamps. Item sub menu POSI. TALLY SELECT SD4:3 LARGE DIMMER Content Select the contents and displaying position of "sub menu." The setting values and features are as follows. LOWER1 : Displays the current setting and adjustment bar at the lower part of the screen. UPPER1 : Displays the current setting and adjustment bar at the upper part of the screen. LOWER2 : Displays the current setting at the lower part of the screen. UPPER2 : Displays the current setting at the upper part of the screen. • The adjustment bar is not displayed for some items. Select the color of the tally lamp. Selects the picture size when the input signal format is 4:3. The setting values and features are as follows. OFF : Matches the vertical picture size to the number of pixels. ON : Matches the horizontal picture size to the horizontal size of the screen. Select the intensity of the button lamps. Setting value LOWER1 UPPER1 LOWER2 UPPER2 GREEN, RED OFF ON NORMAL, DARK PICTURE SUB ADJ. Configure the standard level of image adjustment. Item CONTRAST *1 BRIGHT *1 CHROMA *1 sub menu reset Content Setting value Adjust the standard level for the contrast adjusted with the CONTRAST knob on the front panel. - 20 - +20 Adjust the standard level for the brightness adjusted with the BRIGHT knob on the front panel. - 20 - +20 Adjust the standard level for the chroma adjusted with the CHROMA knob on the front panel. - 20 - +20 Display the sub menu which enables you to adjust the items in "PICTURE SUB ADJ." while viewing the actual picture. Restore the default settings for all the items in "PICTURE SUB ADJ." (You cannot select items to reset.) *1 Memorized for each input. H POSITION ADJ. Adjust the center position of SIDE BY SIDE images. Item Content Setting value 3D H POSITION sub menu reset Display the center line to adjust the horizontal image position. • The setting will be valid when the 3D mode is "ON" and MIX mode is "OFF" or invalid. - 032 - +031 Display the sub menu which enables you to adjust the items in "H POSITION ADJ." while viewing the actual picture. Restore the default settings for all the items in "H POSITION ADJ." WHITE BALANCE SET. Selects the gamma correction value, color temperature and adjusts the drive level and cutoff point of each color (R/G/B). Item GAMMA COLOR TEMP. R DRIVE G DRIVE B DRIVE *1 R CUT OFF G CUT OFF B CUT OFF *1 sub menu reset Content Select a gamma correction. Select the color temperature. • The color temperature is corrected when the 3D mode is "ON." Adjust the drive level of each color (red, green, and blue). Setting value 2.2 (equivalent to γ2.2), 2.35 (equivalent to γ2.35) 2.45 (equivalent to γ2.45), 2.6 (equivalent to γ2.6) 9300K, 6500K, USER MIN - 000 - MAX (in 256 grades) Adjust the cutoff point of each color (red, green, and blue). MIN - 000 - MAX (in 256 grades) Display the sub menu which enables you to adjust the items in "WHITE BALANCE SET." while viewing the actual picture. Restore the default settings for the drive levels and cutoff points of the selected color temperature. (You cannot select items to reset.) *1 Memorized for each color temperature. 23