JVC GR-SX851U Instruction Manual - Page 19

5 SEC. REC Button RETAKE (2/3) Button Display PAUSE 5S 5 Sec. Rec mode indicator EN19 FEATURE: Quick Review PURPOSE: To check the end of the last recording. OPERATION: 1) Set the Power Switch to "CAMERA" ("AUTO" or "PRO."). 2) Press 2 and release quickly during the Record- Standby mode. Ⅲ Tape is rewound for approx. 2 seconds and played back automatically, then pauses in Record-Standby mode for the next shot. NOTE: Distortion may occur at the start of playback. This is normal. FEATURE: Retake PURPOSE: To re-record certain segments. OPERATION: 1) Make sure the camcorder is in the Record-Standby mode. 2) Press and hold either RETAKE to reach the start point for new recording. Pressing 3 forwards the tape and pressing 2 reverses it. 3) Press the Recording Start/Stop Button to start recording. NOTE: Noise bars appear and pictures may become monochrome or darken during Retake. This is normal. FEATURE: 5Sec. Rec (5-sec. Recording) PURPOSE: To record a scene for 5 seconds, providing quick scene transitions like those seen in TV programs. OPERATION: Ⅲ Make sure the recording mode is set to "SP". 1) During Record-Standby, press 5SEC. REC. " 5S" appears and 5Sec. Rec is reserved. 2) Press the Recording Start/Stop Button. Recording starts, and after 5-second recording is finished, the camcorder reenters the Record-Standby mode automatically. Ⅲ To cancel the 5Sec. Rec. function, press 5SEC. REC again so that " 5S" disappears. NOTE: Fade/Wipe (੬ pg. 21) cannot be activated by pressing 5SEC. REC.