JVC GR-SX851U Instruction Manual - Page 50

User Maintenance

Page 50 highlights

50 EN LENS COVER Open/Close Ring BATTERY RELEASE Set to "OFF". USER MAINTENANCE After Use 1 Turn off the camcorder. 2 Open the LCD monitor* fully. Slide EJECT to open the cassette holder, then remove the cassette. 3 Press PUSH to close and lock the cassette holder. 4 Close and lock the LCD monitor*. 5 Slide BATTERY RELEASE to remove the battery pack. 6 Turn the LENS COVER Open/Close Ring to close the lens cover. PUSH Button Remove. EJECT Switch PUSH Button Remove. EJECT Switch Cleaning The Camcorder 1 To clean the exterior, wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth. 2 Open the LCD monitor* and wipe gently with a soft cloth. Be careful not to damage the monitor*. Close the LCD monitor*. 3 To clean the lens, blow it with a blower brush, then wipe gently with lens cleaning paper. 4 To detach the eyepiece, turn it counterclockwise and pull it out. 5 Remove dust from the viewfinder using a blower brush. 6 Re-attach the eyepiece and turn it clockwise. *GR-SXM320 only. NOTES: ● Avoid using strong cleaning agents such as benzine or alcohol. ● Cleaning should be done only after the battery pack has been removed or other power units have been disconnected. ● Mold may form if the lens is left dirty. ● When using a cleaner or chemically treated cloth refer to the cautions of each product. ● When removing the eyepiece, be sure to hold the viewfinder securely.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

50
EN
USER MAINTENANCE
After Use
1
Turn off the camcorder.
2
Open the LCD monitor* fully. Slide
EJECT
to open the
cassette holder, then remove the cassette.
3
Press
PUSH
to close and lock the cassette holder.
4
Close and lock the LCD monitor*.
5
Slide
BATTERY RELEASE
to remove the battery pack.
6
Turn the
LENS COVER
Open/Close Ring to close
the lens cover.
Cleaning The Camcorder
1
To clean the exterior, wipe gently with a soft cloth.
Put the cloth in diluted mild soap and wring it well to
wipe off heavy dirt. Then wipe again with a dry cloth.
2
Open the LCD monitor* and wipe gently with a soft
cloth.
Be careful not to damage the monitor*.
Close
the LCD monitor*.
3
To clean the lens, blow it with a blower brush, then
wipe gently with lens cleaning paper.
4
To detach the eyepiece, turn it counterclockwise and
pull it out.
5
Remove dust from the viewfinder using a blower
brush.
6
Re-attach the eyepiece and turn it clockwise.
*GR-SXM320 only.
NOTES:
Avoid using strong cleaning agents such as benzine or
alcohol.
Cleaning should be done only after the battery pack has
been removed or other power units have been
disconnected.
Mold may form if the lens is left dirty.
When using a cleaner or chemically treated cloth refer
to the cautions of each product.
When removing the eyepiece, be sure to hold the
viewfinder securely.
LENS COVER Open/Close Ring
Set to “OFF”.
BATTERY RELEASE
Remove.
PUSH Button
EJECT Switch
Remove.
PUSH Button
EJECT Switch