JVC KW-NX7000BT Instructions - Page 124
Symptoms, Remedies/Causes, SD/USB, Bluetooth, Special Device, Audio Video Remote Control Profile.
UPC - 046838039010
View all JVC KW-NX7000BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
ENGLISH SD/USB Symptoms Remedies/Causes • Noise is generated. The track played back is not a playable file format. Skip to another file. • Tracks cannot play back as you have intended Playback order may differ from the one played back using them to play. other players. • "Now Reading..." keeps flashing on the screen. • Readout time varies depending on the SD card/USB device. • Do not use too many hierarchy and folders. • Turn off the power then on again. • Correct characters are not displayed (e.g. album name). For available characters. (☞ page 119) • While playing a track, sound is sometimes The tracks are not properly copied into the SD card/USB interrupted. device. Copy tracks again, and try again. • Bluetooth device does not detect the unit. This unit can be connected with one Bluetooth cellular phone and one Bluetooth audio player at a time. While connected to a device, this unit cannot be detected from another device. Disconnect currently connected device and search again. • The unit does not detect the Bluetooth device. • Check the Bluetooth setting of the device. • Search from the Bluetooth device. • The unit does not make pairing with the Bluetooth device. • Enter the same PIN code for both the unit and target device. If the PIN code of the device is not indicated on its instructions, try "0000" or "1234." • Select the device name from , then try to connect again. (☞ pages 83, 111) • Echo or noise occurs. Adjust the microphone unit position. • Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth cellular phone. • Move the car to place where you can get a better signal reception. • The sound is interrupted or skipped while using a Bluetooth audio player. • Reduce the distance between the unit and the Bluetooth audio player. • Disconnect the device connected for "Bluetooth PHONE." • Turn off, then turn on the unit. • (When the sound is not yet restored,) connect the player again. • "NEW DEVICE" cannot be selected for "Bluetooth AUDIO." Bluetooth audio player is already connected. To select "NEW DEVICE," disconnect it. (☞ page 83) • The connected audio player cannot be controlled. Check whether the connected audio player supports AVRCP (Audio Video Remote Control Profile). • "Reset08" appears on the screen. Check the connection between the adapter and this unit. Bluetooth 124