JVC KW-NX7000BT Instructions - Page 80

ENGLISH USB operations You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, portable HDD, etc. to the unit. • You can also connect the iPod to the USB terminal of the unit. For details of the operations, ☞ pages 96 to 98. ~ Connect a USB device. USB cable from the rear of the unit • You cannot connect a computer to the USB ( ) terminal of the unit. The source changes to "USB" and playback starts. This unit can play JPEG/MPEG1/MPEG2*1/MP3/WMA/ WAV/AAC*2 files stored in USB mass storage class device. • You can operate the USB device in the same way you operate the files on discs. (☞ pages 66 to 70, 73 and 74) • All tracks in the USB device will be played repeatedly until you change the source. • Make sure all important data has been backed up. *1 Except for MPEG2 files recorded by JVC Everio camcorder (extension code ). *2 This unit can play back AAC files encoded using iTunes. This unit cannot play back FairPlay-encrypted files. Caution: • Avoid using the USB device if it might hinder your safety driving. • Do not pull out and attach the USB device repeatedly while "Now Reading..." is flashing on the monitor screen. • Do not start the car engine if a USB device is connected. • Stop playback before disconnecting a USB device. • Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause damages to the device. • For more details about USB operations, ☞ page 114. 80