JVC KW-NX7000BT Instructions - Page 95

ENGLISH Changing HD Radio reception mode While receiving an HD Radio broadcast, the unit tunes to digital or analog audio automatically due to the receiving condition. 1 CHANNEL Tuning in to stations with sufficient signal strength This function works only for FM bands. Once you have activated this function (selected ), it always works when searching for FM stations. 1 CHANNEL 2 2 3 Mode Mono Local / DX SSM Blend Hold Back Exit Local DX Start Auto Digital Analog Exit 3 Mode Mono Local / DX SSM Blend Hold Back Exit Local DX Start Auto Digital Analog Exit Auto Digital Analog Switch between digital and analog audio automatically Tuning to digital audio only Tuning to analog audio only • If no sound can be heard from the selected setting, change the setting to or . • The setting automatically changes to if you tuned in to or change to another station, or if you turned off the power. • This setting cannot take effect for the conventional FM/AM stations. • If the radio station forces the reception mode to digital, the DIGITAL indicator flashes. Only stations with sufficient signal strength will be detected. • The DX indicator goes off, then the LO indicator lights up. 95 AV OPERATIONS