JVC KW-V820BT Instruction Manual - Page 54
Using the sound equalization, Setting the crossover network mode
View all JVC KW-V820BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
SETTINGS ❏❏Using the sound equalization • The adjustment is memorized for each source until you adjust the sound again. If the source is a disc, the adjustment is stored for each of the following categories. -- DVD-Video -- CD/VCD/Audio files/Video files (Page 73) • You cannot adjust the sound when the AV source is turned off. Selecting a preset sound mode 1 Display the screen. (Page 53) 2 Display the screen. • You can also display the phone control screen by selecting [ ] on the pop-up short-cut menu. (Page 11) 3 Display the preset sound modes (1), then select a sound mode (2). Storing your own adjustments-Adjusting the sound precisely 1 Display the screen. (See the left column.) 2 Select a band and adjust the level of the selected band. • You can adjust the level by dragging the slider or using [J]/[K]. • Repeat this step to adjust the level of other bands. 3 Activate ([ON]) or deactivate ([OFF]) the bass () (1), and then adjust the subwoofer level ()* (2). • To apply the adjusted equalizer to all playback source, touch [ALL SRC] on the screen, then touch [OK] to confirm. • To make the current EQ curve flat, touch [Initialize]. * Not adjustable when is selected for subwoofer on the screen. (Page 53) ❏❏Setting the crossover network mode Select the appropriate crossover network mode according to the speaker system (2-way speaker system or 3-way speaker system). 1 Turn off the AV source. (Page 6) 2 Press while holding volume + on the monitor panel to display the