JVC KW-V820BT Instruction Manual - Page 71

CONNECTION/INSTALLATION ❏❏Connecting external components VIDEO OUT REAR VIEW CAMERA Connecting external amplifiers for 3 way speakers system ❏❏Connecting microphone for Bluetooth Connect the microphone (7) to the MIC terminal. • To install the microphone, peel off the adhesive tape, fix it on the installation position, then adjust the direction of the microphone to face the driver. After installing, fix the microphone cable to the car with clamps (commercially available). -- Clean the installation surface beforehand. 1 iDatalink input for connecting ADS adapter (commercially available) 2 Video output (Yellow) 3 Rear view camera input (Yellow) 4 Audio Video input (AV-IN) 5 AV-OUT/Audio output (ø3.5 mini jack) Resistance-free stereo type mini plug 6 Front preout* • Audio left output (White) • Audio right output (Red) 7 Subwoofer preout (monaural output)* • Subwoofer left output (White) • Subwoofer right output (Red) 8 Rear preout* • Audio left output (White) • Audio right output (Red) 9 Expansion port for connecting SiriusXM Connect Vehicle Tuner (commercially available) * When connecting an external amplifier, connect its ground wire to the chassis of the car; otherwise the unit may be damaged. Tweeter preout Mid range preout Woofer preout Speaker * RCA cable (not supplied) * When connecting to an external amplifier, connect its ground wire to the car's chassis. 7 ENGLISH 71