JVC KW-V820BT Instruction Manual - Page 69

CONNECTION/INSTALLATION Connection ❏❏Connecting wires to terminals Page 71 VIDEO OUT Connect GPS antenna (5). (Page 72) REAR VIEW CAMERA Page 71 Page 71 If no connections are made, do not let the cable come out from the tab. Page 71 Page 71 Connect the antenna cord to the antenna terminal. 1 To front speaker (left) White White with black stripe To front speaker (right) Gray Gray with black stripe To rear speaker (left) Green Green with black stripe To rear speaker (right) Purple Purple with black stripe Ignition key switch Fuse box Battery (ACC) (BATT) To car chassis (GND) Red (Ignition wire) Yellow (Battery wire) Black (Ground wire) Connect the USB extension cable (4). (Page 70) Connect SiriusXM Connect Vehicle Tuner (commercially available). (Page 71) 15 A fuse Light blue with yellow stripe (Steering remote control wire) Blue (Antenna control wire) Blue with white stripe (Power control wire) Orange with white stripe (Dimmer control wire) Purple with white stripe (Reverse sensor wire) Light green (Parking sensor wire) To use the steering wheel remote control feature, an REMOTE CONT exclusive remote adapter (not supplied) matching your STEERING WHEEL car is required. REMOTE INPUT ANT CONT Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the filmtype antenna. (Max. 300 mA, 12 V) P.CONT When using the optional power amplifier, connect to its power control terminal. ILLUMI REVERSE To car light control switch Connect to the vehicle's reverse lamp harness when using the optional rear view camera. PRK SW Connect to the vehicle's parking brake detection switch harness. • For best safety, be sure to connect the parking sensor. ENGLISH 69