JVC KW-V820BT Instruction Manual - Page 68
Installing the unit
View all JVC KW-V820BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
CONNECTION/INSTALLATION ❏❏Installation procedure 1 To prevent a short circuit, remove the key from the ignition and disconnect the " battery. 2 Make the proper input and output wire connections for each unit. 3 Connect the speaker wires of the wiring harness. 4 Connect the wiring harness wires in the following order: ground, battery, ignition. 5 Connect the wiring harness connector to the unit. 6 Install the unit in your car. • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (e.g., the sound may skip). 7 Reconnect the " battery. 8 Configure . (Page 4) Installing the unit ❏❏Installing the unit using the mounting bracket removed from the car 2 or 3 Car Bracket 2 or 3 • Select the appropriate type of screw for the mounting bracket: flat head (2) or round head (3). 68