Kenmore 7874 Use and Care Guide - Page 32
Compression, IIIIJ/' N
UPC - 719192947870
View all Kenmore 7874 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
9. CONNECT THE TUBING TO THE REFRIGERATOR NOTE: • Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet. 1. Remove the plastic flexible cap from the water valve. 2. Place the compression nut and ferrule (sleeve) onto the end of the tubing as shown. 3. Insert the end of the copper tubing into the connection as far as possible. While holding the tubing, tighten the fitting. _, CAUTION: Check to see if leaks occurs at water line connections. Tubing Cla_ 1/4" \ / Compression IIIIJ/' N Nut _ -4 1/4 "Tubing 10. TURN THE WATER ON AT THE SHUTOFF VALVE Tighten any connections that leak. Reattach the compressor compartment access cover. 11. PLUG IN THE REFRIGERATOR Arrange the coil of tubing so that it does not vibrate against the back of the refrigerator or against the wall. Push the refrigerator back to the wall. (sleeve) RCeofnrnigeecrtaiotonr _, CAUTION: Check to see if water dripping occurs at water line connections. 12. START THE ICEMAKER Set the icemaker power switch to the ON position. The icemaker will not begin to operate until it reaches its operating temperature of 15°F (-9°C) or below. It will then begin operation automatically if the icemaker power switch is in the I (on) position. 32