Kenmore 9787 Use and Care Guide - Page 20

You can customize your cycles by selecting options. Not all Options are available with all cycles. Current selections will glow green. If an option is unavailable with a selected cycle, the light will not illuminate when pressed and an error sound will be heard. OPHONS Wrinkle Guard I20 Use Modifiers to select time, temperatures and dryness levels for the Timed Cycles. Not all Modifiers are available with all options and cycles. Available modifier settings will glow amber. Current selections will glow green. If a modifier is unavailable with a selected cycle, the light will not illuminate. Time Press MORE TIME or LESS TIME until the desired drying time is displayed. The time cannot be changed with Auto Cycles. Adjust rimedCycle ¢' {_}Orum Light O WRINKLE GUARD _ WRINKLE GUARD ® helps smooth out wrinkles that form when you cannot unload the dryer promptly at the end of a cycle. During this option, the dryer stops tumbling and then tumbles again for a brief period Press WRINKLE GUARD ®to get up to 2 hours of heat-free, periodic tumbling at the end of a cycle. Stop WRINKLE GUARD ® at any time by pressing WRINKLE GUARD ® or opening the dryer door. For the Casual cycle, WRINKLE GUARD ®is preset to ON. The other cycles will retain the WRINKLE GUARD ® setting. For example, if you select WRINKLE GUARD ® in the Normal cycle, WRINKLE GUARD ®will be on the next time you select the Normal cycle. Temperature Press TEMPERATURE until the desired temperature setting glows. Temperature modifiers cannot be used with the Auto Cycles or the Air Fluff cycle. Medium High Medium Low Extra Low Air Dry NOTE: If you do not select WRINKLE GUARD ® , the dryer stops after cool down. Damp Dry Signal Select the Damp Dry Signal to alert you that your clothes are approximately 80% dry. This is useful when you want to remove lightweight items in a mixed load to avoid overdrying or remove partially dry items that may need ironing. NOTE: The Damp Dry Signal is available only with the Auto Cycles. Button Sounds ADJUS rs T_NED CYCLE:S Dryness Level Press DRYNESS LEVEL until the desired Dryness Level is selected. Dryness Level cannot be adjusted with Timed Cycles. Norma_ I More Dry Less Dry Dryness> Level Au ,o CYCLES You can change the volume of the sound of the beeps. Press BU]q-ON SOUNDS until the desired volume (Loud, Soft or Off) glows. The Power and Cancel buttons will still beep softly when the Button Sounds volume is set to Off. Drum Light Press Drum Light to turn on the light inside the dryer drum. During a cycle, if Drum Light is selected, the drum light turns on and will remain on until DRUM LIGHT is pressed again, the door is open and closed, or the door is left open for 5 minutes. When the dryer is not running, the drum light will turn on when DRUM LIGHT is pressed or the dryer door is opened, and it will remain on until the dryer door has been open for 5 minutes, the dryer door is closed or DRUM LIGHT is pressed again. Press DRUM LIGHT at any time to turn the drum light ON or OFR You can change Auto Cycles, Timed Cycles, Modifiers and Options anytime before pressing Start. • Three short tones sound if an unavailable combination selected. The last selection will not be accepted. is Changing Cycles after pressing Start 1. Press STOP twice. This ends the current cycle. 2. 3. Select the desired cycle and options. Press and hold START. The dryer starts at the beginning of the new cycle. NOTE: If you do not press START within 5 minutes of selecting the cycle, the dryer automatically shuts off. 20