Kenmore 9787 Use and Care Guide - Page 7

Recommended installation closet installation, The dimensions spacing for recessed or with stacked washer and dryer spacing. E ecru: ca R< su 'sme sts shown are for the recommended 46in.2* (310crn 2) T 3"* (7.6 crn) ... Electrical o Shock Hazard Plug into a grounded 3 prong outlet. prong. ! 3"* (7.6 crn) _ ...__ Do not remove ground Do not use an adapter. 24 in.2 * (155 crn 2) -_, -_- 111'(2.5 crn) Do not use an extension cord. Failure to follow fire, or electrical these instructions shock. can result in death, *Required spacing 6"* (15.2¢rn) !_ A i 120 Volt, 60 Hz., AC only, 15- or 20-amp fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is also recommended that a separate circuit serving only this dryer be provided. \'__j'j '_,},_i _ii,i_ jj _ -76" / {193 crn) GROUNDING INSTRUCTIONS (14cm) 5W'*--_ _[-- 27" _,- _-- 1" 2.5 cm _-- (2.51cm) --_ 68.6 cm *For venting out the side, 1" (2.5 cm) spacing is allowed. Mobile home - additional installation requirements This dryer is suitable for mobile home installations. The installation must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280). Mobile home installations [] [] [] For a grounded, cord-connected dryer: This dryer must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This dryer is equipped with a cord having an equipmentgrounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. WARNING: require: Improper connection of the equipmentgrounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the dryer is properly grounded. Do not modify the plug provided with the dryer: if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Metal exhaust system hardware, which is available for purchase from your local Sears store or Sears Service Center. Mobile home Installation Kit Part Number 346764. See "Tools and Parts" section for information on ordering. Special provisions must be made in mobile homes to introduce outside air into the dryer. The opening (such as a nearby window) should be at least twice as large as the dryer exhaust opening. SAVE THESE INSTRUCTIONS []