Kenwood DNN770HD User Manual - Page 74

Return to the Top page Audio Setting Up ÑÑHighway sound setting You can boost a certain range of sound that becomes hard to hear due to road noise. 1 Touch [Highway Sound] in the Sound Effect screen. Highway Sound screen appears. ÑÑRealizer and Supreme You can restore the sound lost due to audio compression to a realistic sound. 1 Touch the screen in the Sound Effect screen. 2 Select the boost level from among [High], [Low], and [OFF]. ÑÑElevation You can raise the sound position heard from the speakers virtually. 1 Touch [Elevation] in the Sound Effect screen. Realizer Realizer is sound enhancement and boosting low frequencies (bass boost). Select the level from "OFF"/ "Level1"/ "Level2"/ "Level3". Supreme Turns ON/OFF the Supreme function. Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding. This function works on DVD MEDIA, USB, SD and iPod sources. Elevation screen appears. 2 Select Elevation level from [High], [Low], and [OFF]. 146 Zone Control You can select different sources for both front and rear positions in the vehicle. 1 Touch [Zone Control]. Zone Control screen appears. 2 Touch [Dual Zone]. Return to the Top page Audio Setting Up NOTE • When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. • When the dual zone function is set to on, the following functions are not available. --Output from the subwoofer --Subwoofer Level/Bass Boost (P.142) --Equalizer Control/Sound Effect/Listening Position (P.143, 145, 148) --DSP Bypass Control/Speaker Setup/Car Type Setup (P.141, 139, 140) 3 Set each source as follows. [D] (Front Source, Rear Source) Select the audio source for each. [S], [R] (Rear VOL.) Adjust the rear channel volume. [Single Zone] Touch to turn off the dual zone function. 147