Kodak I1410 User Guide - Page 45
Changing print positions
UPC - 041778232408
View all Kodak I1410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Changing print positions The horizontal print position can be changed manually. NOTE: Changing the print position is the same procedure whether you are using the Document Printer or the Enhanced Printer. The photos may be slightly different depending on the printer you are using. Changing the print position 1. Locate the printer access door on the back of the scanner. 2. Slide your fingers under the printer access door handle and pull the door toward you. 3. Lift the printer access door off the scanner. NOTES: • Even though there are 14 horizontal print positions, if you are using the Enhanced Printer, you can only print in 9 of the positions. • If you are using the Document Printer, all 14 print positions are available for printing. • These positions are visible by a small detent on the printer rail. • Printing automatically stops approximately ½-inch (1.27 cm) from the trailing edge of the document, even if the information has not been completely printed 4. Lift up on the printer carrier and remove it from position. A-61550 July 2008 Print positions 5. Align the slot on the printer carrier with the desired position and slide the printer carrier in place. 6. Reinstall the printer access door. 41