Kodak I1410 User Guide - Page 54
Remove any dust or debris from the tray area under the feed, this for procedures.
UPC - 041778232408
View all Kodak I1410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
3. Manually rotate and wipe the feed module tires with a roller cleaning pad. 4. Inspect the feed module. If the feed module tires show signs of wear or damage, replace the tires or the feed module. See the section entitled, "Replacing the feed module and feed module tires" later in this chapter for procedures. 5. Remove any dust or debris from the tray area under the feed module and the front roller cover. 6. Insert the feed module by aligning the pins and pushing it toward the right to fit it into position. 7. Reinstall the front drive roller cover. 50 A-61550 July 2008
50
A-61550
July 2008
3.
Manually rotate and wipe the feed module tires with a roller cleaning
pad.
4.
Inspect the feed module. If the feed module tires show signs of wear
or damage, replace the tires or the feed module. See the section
entitled, “Replacing the feed module and feed module tires” later in
this chapter for procedures.
5.
Remove any dust or debris from the tray area under the feed
module and the front roller cover.
6.
Insert the feed module by aligning the pins and pushing it toward the
right to fit it into position.
7.
Reinstall the front drive roller cover.