Kodak I1410 User Guide - Page 59
Repeat Steps 6-9 for the other core assembly., Reinstall the feed module.
UPC - 041778232408
View all Kodak I1410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
6. Lift and remove one core assembly. 7. Remove each tire by sliding it off of the core. 8. Install each new tire by gently stretching it over the core. IMPORTANT: • Do not overstretch the tire; it may tear. • Make sure that the tire is centered on the core and lies flat. 9. Replace the core assembly in the feed module and snap it into place. 10. Repeat Steps 6-9 for the other core assembly. 11. Reinstall the feed module. 12. Reinstall the front roller cover. 13. Close and latch the scanner cover. A-61550 July 2008 55
A-61550
July 2008
55
6.
Lift and remove one core assembly.
7.
Remove each tire by sliding it off of the core.
8.
Install each new tire by gently stretching it over the core.
IMPORTANT:
•
Do not overstretch the tire; it may tear.
•
Make sure that the tire is centered on the core and lies flat.
9.
Replace the core assembly in the feed module and snap it into
place.
10.Repeat Steps 6-9 for the other core assembly.
11. Reinstall the feed module.
12.Reinstall the front roller cover.
13.Close and latch the scanner cover.