Kodak I1410 User Guide - Page 58
Replacing the feed module and feed module tires
UPC - 041778232408
View all Kodak I1410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Replacing the feed module and feed module tires 1. Lift up the scanner cover release to unlatch the scanner cover. 2. Lift up to open the scanner cover. 3. Push against the raised edge on the left side of the front drive roller cover to the side and pull the cover up and out to remove it. NOTE: You may need to lift the input tray slightly to remove the front roller cover. 4. Remove the feed module by pushing it to the right and lifting it out. 5. If you are just replacing the feed module, insert the new feed module by aligning the pins and snapping it into position. If you are replacing the feed module tires, continue with the next step. 54 A-61550 July 2008
54
A-61550
July 2008
Replacing the feed module
and feed module tires
1.
Lift up the scanner cover release to unlatch the scanner cover.
2.
Lift up to open the scanner cover.
3.
Push against the raised edge on the left side of the front drive roller
cover to the side and pull the cover up and out to remove it.
NOTE:
You may need to lift the input tray slightly to remove the
front roller cover.
4.
Remove the feed module by pushing it to the right and lifting it out.
5.
If you are just replacing the feed module, insert the new feed
module by aligning the pins and snapping it into position.
If you are replacing the feed module tires, continue with the next
step.