Kodak I1410 User Guide - Page 46
Replacing the ink blotter strips, If you are replacing a blotter strip, proceed with Step 5, if
UPC - 041778232408
View all Kodak I1410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Replacing the ink blotter strips The two ink blotter strips in the scanner transport area collect ink overflow. To order additional ink blotter strips, see the section entitled, "Supplies" later in this guide. 1. Lift up the scanner cover release to unlatch the scanner cover. 2. Pull up to open the scanner cover. 3. Locate the two blotter strip channels. These channels are where the blotter strips will be installed or replaced. Blotter strip channels 4. If you are replacing a blotter strip, proceed with Step 5, if not, go to Step 6. 5. Grasp the blotter strip, carefully pull it off of the channel and discard the soiled strip. 6. Remove the backing from a new blotter strip. 42 A-61550 July 2008
42
A-61550
July 2008
Replacing the ink
blotter strips
The two ink blotter strips in the scanner transport area collect ink
overflow. To order additional ink blotter strips, see the section entitled,
“Supplies” later in this guide.
1.
Lift up the scanner cover release to unlatch the scanner cover.
2.
Pull up to open the scanner cover.
3.
Locate the two blotter strip channels. These channels are where the
blotter strips will be installed or replaced.
4.
If you are replacing a blotter strip, proceed with Step 5, if not, go to
Step 6.
5.
Grasp the blotter strip, carefully pull it off of the channel and discard
the soiled strip.
6.
Remove the backing from a new blotter strip.
Blotter
strip
channels