Konica Minolta bizhub 4020i bizhub 5020i/4020i Quick Guide - Page 15
Paper Orientation for, Letterhead and Preprinted, Paper, Settings], Printer], sided], Single Image]
View all Konica Minolta bizhub 4020i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
4 Load paper in the paper tray with the printing surface face down. When you use Letterhead or Preprinted paper, load the paper in the correct orientation as shown in the illustrations. Paper Orientation for Letterhead and Preprinted Paper For 1-sided printing 5 Make sure the paper is below the maximum paper mark (b b b). Overfilling the paper tray will cause paper jams. 2 Paper Handling • face down • top edge toward the front of the paper tray For automatic 2-sided printing (long edge binding) 6 Slowly push the paper tray completely into the machine. 7 Lift the support flap to prevent paper from sliding off the output tray. • face up • bottom edge toward the front of the paper tray • DO NOT load different sizes and types of paper in the paper tray at the same time. Doing this may cause the paper to jam or misfeed. • When you use Letterhead or Preprinted paper for 2-sided printing, change the machine's setting by completing the following step: - Press [Settings] > [All Settings] > [Printer] > [2sided] > [Single Image] > [2-sided Feed]. 9