Konica Minolta bizhub 4020i bizhub 5020i/4020i Quick Guide - Page 46
No Paper Fed T3
View all Konica Minolta bizhub 4020i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Error Message Cause Action Jam 2-sided The paper is jammed in Remove the 2-sided tray and open the the 2-sided tray or inside back cover to pull out all jammed paper. the back cover. Jam Inside The paper is jammed inside the machine. Open the front cover, remove the toner cartridge and imaging unit assembly, and pull out all jammed paper. Close the front cover. Jam MP Tray The paper is jammed in Remove all jammed paper from in and the MP tray. around the MP tray. Press Retry. Jam Rear The paper is jammed in Open the fuser cover and remove all the back of the machine. jammed paper. Close the fuser cover. Jam Tray 1 Jam Tray 2 Jam Tray 3 The paper is jammed in the indicated paper tray. Pull out the paper tray and remove all jammed paper as shown in the animation on the LCD. Media Type Mismatch The media type specified Load the correct type of paper in the tray in the printer driver differs indicated on the LCD, and then select from the paper type the correct media type in the Paper Type specified in the machine's setting on the machine. menu. No Drum Unit The imaging unit is not installed correctly. Reinstall the toner cartridge and imaging unit assembly. No Paper The machine is out of paper, or paper is not loaded correctly in the paper tray. • Refill paper in the paper tray. Make sure the paper guides are set to the correct size. • If paper is in the tray, remove it and load it again. Make sure the paper guides are set to the correct size. No Paper Fed T1 No Paper Fed T2 No Paper Fed T3 The machine failed to feed paper from the indicated paper tray. Pull out the paper tray indicated on the LCD and remove all jammed paper. No Paper MP The MP tray is out of Do one of the following: paper, or paper is not loaded correctly in the MP tray. • Refill paper in the MP tray. Make sure the paper guides are set to the correct size. • If paper is in the tray, remove it and load it again. Make sure the paper guides are set to the correct size. 40