Konica Minolta bizhub 4020i bizhub 5020i/4020i Quick Guide - Page 49

Error Message Cause Action Size Error The paper size defined in the printer driver is not supported by the defined tray. Choose a paper size supported by the defined tray. Size Error 2-sided The paper size specified in the machine's paper Press (if required). size setting is not Load the correct size of paper in the tray available for automatic 2- and set the tray for that paper size. sided printing. Choose a paper size supported by 2- The paper in the tray is sided printing. not the correct size and is not available for automatic 2-sided printing. Paper sizes available for automatic 2sided printing are Letter, Legal, Mexico Legal, India Legal and Folio. Size Mismatch The paper in the tray is not the correct size. Load the correct size of paper in the tray indicated on the LCD and set the size of paper for the tray. Supplies Drum End Soon The imaging unit is near Order a new imaging unit before the the end of its life. LCD displays Replace Drum. Supplies Replace Drum It is time to replace the imaging unit. Replace the imaging unit with a new one. The imaging unit counter Reset the imaging unit counter. was not reset when a new See the instructions included with the drum was installed. new imaging unit. Supplies Toner Low If the LCD displays this message, you can still print. The toner cartridge is near the end of its life. Order a new toner cartridge now so a replacement toner cartridge is available when the LCD displays Replace Toner. Wrong Paper Size MP Wrong Paper Size T1 Wrong Paper Size T2 Wrong Paper Size T3 The specified tray ran out of paper during copying and the machine could not feed the same size paper from the next priority tray. Refill the paper in the paper tray. A Troubleshooting 43