Konica Minolta bizhub 42 bizhub 36/42 Copy Operations User Guide - Page 52
Finishing], inal Glass, Settings
View all Konica Minolta bizhub 42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
5.7 [Finishing] 5 Settings [Staple] Staples copies in corner or at two points before they are output. [Corner] [Position Setting] Select [Top Left], [Top Right], or [Auto] as the staple position. [Original Direction] Select the orientation of the original loaded into the ADF or placed on the Original Glass. Without setting [Original Direction], the resulting copy may not be what you intended. [2 position] [Position Setting] Select [Top], [Left], [Right], or [Auto] as the staple position. [Original Direction] Select the orientation of the original loaded into the ADF or placed on the Original Glass. Without setting [Original Direction], the resulting copy may not be what you intended. [None] Copies are not stapled. Select Auto, and the machine automatically judges the staple positions for the paper relative to the original direction loaded. • A staple position along the long side of the paper is selected if the original length is 11-11/16 inches (297 mm) or less. • A staple position along the short side of the paper is selected if the original length exceeds 11-11/16 inches (297 mm). • Staple positions are set on the upper or left-side end. • Load the original by placing it so that its head (top side) faces the left. bizhub 42/36 5-12