Konica Minolta bizhub 42 bizhub 36/42 Copy Operations User Guide - Page 86

8.2 Troubleshooting table 8 Main messages and their remedies If any message other than those listed below appears, perform the operation described in the message. Message [Replenish Paper] [Replenish paper in Tray o or select other paper tray. xxx] [Paper Size/Type Mismatch] [Load the following paper in tray o. xxx] [Paper Size Mismatch] [Load the following paper or cancel job. xxx] [Matching Paper not Available] [Matching paper size not available. xxx] [Replenish paper] [Replenish paper. xxx] [Check Scanner Lock Lever] [Unlock the scanner lock lever.] [Place Original on Glass] [Unable to scan from ADF with this original size] [Place Original on Glass] [Unable to scan from ADF with this zoom ratio.] [Place Original on ADF] [Place originals on the Document Feeder.] [Out of the Range of Auto Zoom] [Zoom ratio for paper size is outlying. Select other paper or zoom ratio.] [Duplex Copy Disabled] [Duplex copy disabled. Cancel or select: xxx] [Output Tray Full] [Output tray full. Remove paper from the tray.] [Processing Tray Paper Left] [Remove paper from finisher tray] [User Authentication Set user information.] [Account Track Set account information.] Cause Paper of a suitable size is not loaded in a paper tray. The type and size of the paper loaded into all of the paper trays are different. The paper size specified from the Touch Panel is different from the size of paper loaded in the paper tray. Paper of the same size as the document cannot be selected with the Auto Paper setting selected in Copy mode. The indicated tray has run out of paper. The scanner is locked. The selected document size cannot be scanned from the ADF. The selected zoom ratio (200% or more) cannot be used to scan from the ADF. The document is not loaded into the ADF when scanning a document containing pages of different sizes. An appropriate zoom ratio cannot be selected with the Auto Zoom setting selected. The selected paper type and size cannot be used with duplex (double-sided) printing. Copy cannot be performed because the paper loading capacity of the output tray of the displayed Finisher FS-529 has reached the maximum. While paper is present on the processing tray of Finisher FS529, the power switch is turned on. User authentication settings have been configured. Copies cannot be made unless a user name and correct password are entered. Account track settings have been configured. Copies cannot be made unless an account name and correct password are entered. Remedy Load paper of a suitable size or select another paper tray. Load the specified paper into a paper tray. Load paper of the correct size into the indicated paper tray. Load the paper tray with paper of the same size as the document. Add paper. (p. 7-3) Cancel the job. Unlock the scanner. Place the document on the original glass if it has a size that cannot be scanned from the ADF. Place the document on the original glass. Load the document into ADF. Specify a zoom ratio between 25% and 400%. Cancel duplex (double-sided) printing, or change the paper type and size settings. Remove all paper from the indicated tray. Remove paper from the finisher tray. Enter the correct user name and password. (p. 4-12) Enter the correct account name and password. (p. 4-12) bizhub 42/36 8-6