Kyocera FS-1028MFP FS-1028MFP/1128MFP Operation Guide Rev-3 - Page 327
Right Select, Description, Default Setting, Restarting the, System
View all Kyocera FS-1028MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 327 highlights
Default Setting (System Menu) Item Description Default Setting Restarting the System* IPP Select whether or not to use Off z IPP, and the number of the Port number: 631 port to be used. IPP over SSL Select whether or not to use On z IPP over SSL. SSL must be set to [On] in SSL Setting on page 8-137. * z: The machine must be restarted after the setting is changed. ×: The machine does not need to be restarted after the setting is changed. Use the procedure below. Sys. Menu/Count.:a b 1 In the Sys. Menu/Count. menu, press the U or V key to select [System], and press the OK key. 1 Report 2 Counter *3 **S*y*s*t*e*m [ Exit ] 8 Login User Name: L b Login Password: When you are performing user management and have not logged in, a login screen will appear. Then, enter the user ID and password to log in, and press [Login] (the Right Select key). [ Login ] System: a b *1**N*e*t*w*o*r*k**S*e*t*t*i*n*g**** 2 I/F Block Set. 3 Security Level [ Exit ] 2 The System menu appears. Network Setting: a b *1**T*C*P*/*I*P**S*e*t*t*i*n*g*s**** 2 NetWare 3 AppleTalk [ Exit ] 3 Press the U or V key to select [Network Setting]. 4 Press the OK key. The Network Setting menu appears. 5 Press the U or V key to select [TCP/IP Settings]. OPERATION GUIDE 8-135