Kyocera FS-6525MFP FS-6525MFP/6530MFP Operation Guide - Page 67

Preparation before Use > Command Center RX (Settings for E-mail) Item Login Password SMTP Security POP before SMTP Timeout Test E-mail Size Limit Sender Address Signature Domain Restriction 3 Click [Submit]. Description When Other is selected for Authenticate, the password set here will be used for authentication. The maximum length of the login password is 64 characters. Enables or disables the SMTP Security. When this protocol is enabled, either SSL/TLS or STARTTLS must be selected. To enable SMTP security, the SMTP port may have to be changed according to the server settings. Typically, 465 for SSL/TLS and 25 or 587 for STARTTLS are well-known SMTP ports. Set the amount of time to wait before time-out in seconds when you have selected POP before SMTP as the Authentication Protocol. Tests to confirm that the settings on this page are correct. When the Test button is pressed, this machine tries to connect to the SMTP server. Enter the maximum size of E-mail that can be sent in kilobytes. When the value is 0, no maximum size is set. Enter the E-mail address of the person responsible for the machine, such as the machine administrator, so that a reply or non-delivery report will go to a person rather than to the machine. The sender address must be entered correctly for SMTP authentication. The maximum length of the sender address is 128 characters. Enter the signature. The signature is free form text that will appear at the end of the E-mail body. It is often used for further identification of the machine. The maximum length of the signature is 512 characters. Enter the domain names that can be permitted or rejected. The maximum length of the domain name is 32 characters. You can also specify E-mail addresses. 2-27