Kyocera KM-2560 2560/3060 Printer Driver User Guide Rev 12.13 - Page 33
Collate, Duplex Printing, Quick Print, KX DRIVER
View all Kyocera KM-2560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Quick Print Collate This icon changes the ordering of the printed pages. The page ordering sequence can either be 123, 123, 123, or 111, 222, 333, and so on. You can also reverse the order of the printed pages by selecting the Reverse check box. (Reverse is available when Printer default is not selected under Destination in the Basic tab. Reverse can be disabled in Device Settings > Compatibility Settings.) Print on both sides This icon changes between duplex printing for flipping on the long edge, duplex printing for flipping on the short edge, or for not using duplex printing. Multiple pages per sheet This icon changes between Off, 2, and 4 for the number of pages printed on one sheet. For more than 4 pages per sheet, define these settings in Layout > Multiple pages per sheet. Any basic print options can be Reset to the default values in the Quick Print tab. This button only appears when it is accessed from an application's Print dialog box. The following sections describe some of the Quick Print tab options in more detail. Collate, Duplex printing, and EcoPrint can also be found in the Basic and Imaging tabs, and Multiple pages per sheet in the Layout tab. The Profiles options are accessed from Printing Preferences. Collate Collate specifies the order in which the pages of a multiple copy job are printed. With Collate selected, the first time the print job is sent to the printing system the data is rendered as page images in the printing system's memory. The remaining job copies are printed from the stored data. This avoids the extra processing involved in sending every copy from the computer to the printing system. With Collate selected, the driver prints the complete job set by set. With Collate cleared, it prints each page by set. For example, with Collate selected, three copies of a five-page document outputs as pages one through five in succession, three times. The printer driver automatically overrides the application's Collate setting and uses the printer driver setting. You can use the application's Collate setting by clearing the Ignore application collation check box in the Compatibility Settings dialog box accessed from Device Settings. Duplex Printing Duplex printing is printing on both sides of each page. Select Print on both sides to start duplex printing. The printer system contains a duplex unit that turns the paper over to allow printing on the reverse side. Print on both sides must be selected to print on both sides of the cover and insert pages. Flip on long edge Turn the long edge of the page to view the content, like the pages of a book bound at the side. Flip on short edge Turn the short edge of the page to view the content, like a tablet bound at the top. KX DRIVER 3-2