Kyocera KM-6030 Scan System (G) Operation Guide (Setup Edition) - Page 27

Performing the Required Operation at the Scanner 8 Check the selected destinations. Use [S] and [T] to make sure that all of the selected destinations are correct. If an incorrect or unnecessary destination is in the list, select it and press [Delete]. Ready to scan. Place the original and select destination. Scan to PC-Multiple TX Destination Group A Group B User A Save at User PC Address Book Delete Auto Select Orig.Size Auto size Select Send Size B as ic Original A4 08/25 Single Scan Rear Orig. Set Direction 300dpi Scanning Resolution Quality Scan settings 9 The Scan Settings menu is displayed in to scan. the right portion of the touch panel. If ginal and select destination. you want to change any settings, press ple TX the key that corresponds to that setting. The following gives an example of the procedure to specify the orientation of the original. Delete Press [Orig. Set Direction]. Address Book Auto Select Orig.Size Auto size Select Send Size B as ic Original Send A4 A4 08/25/`04 18:31 Single Scan Cancel Rear Orig. Set Direction 300dpi Scanning Resolution Quality Auto File Name PDF File Type Edit 10 If you set the original with its top edge to scan. towards the rear of the scanner, select ginal and select destination. Top Edge. If you set the original with its on top edge towards the left of the scanner, select Left Edge. Press [Close] to register the change to that setting or [Back] if you want to cancel the operation and return to the previous setting. The screen will return to that "Check direction of original" shown at right side of display. Follow the steps. If setting mode is wrong, incorrect copy will result. shown in step 9. Original Send A4 A4 08/25/`04 18:31 B ack Close Select Original Image Direction. Top Edge Left Top Note If the setting for the orientation of the original is not appropriate to the actual orientation, scanning may be accomplished incorrectly. Be sure to confirm the orientation of the original when making scan settings. 11 Once you have checked all of the Now scanning originals. settings, set the original and press the 08/25 [Start] key. Orig.O_rSiget._PDairgeection Send Scanning of the original will begin. Send E-mail If you want to stop the scanning A4 1 sided operation, press [Cancel]. Rear A4 SCAN006_0000.tif User name: User A 12 If you select ON under Batch scanning in ginal(s). the [Edit] tab in the Scan Settings menu ginals and press start key. ing finished" key to finish scanning. screen, a screen that asks whether or Step 2 not you want to continue scanning will appear after scanning of the original is complete. Rear Orig. Set Direction 300dpi If you DO want to continue scanning, set Scanning the next original, change any scan Resolution settings that you want, and then press Quality Edit the [Start] key. 08/25/`04 18:31 Cancel Original 1 Page SCAN0060_000.tif Scanning finished Once you have finished scanning originals, press [Scanning finished]. 19