Kyocera KM-6030 Scan System (G) Operation Guide (Setup Edition) - Page 33

Performing the Required Operation at the Scanner Scanning with TWAIN The following explains the settings that need to be made in the scanner in order to scan using the TWAIN function. When performing the scanning operation at the scanner 1 Press the [Scanner] key. 2 Press [TWAIN]. Select scanner function. 08/25/`04 3 Set the original that you want to scan. Send E-mail Scan to PC Database Connection T WA IN Edit Addr. Book History of Sending 4 Run the TWAIN Source in the corresponding application. The main dialogue box for the TWAIN Source will appear. Make any settings that you want, click on the [Connect] button in the dialogue box and, once the connection to the scanner is made, click on the [Scan] button. Scanning will begin. When performing the scanning operation at your PC 1 Run the TWAIN Source in the corresponding application. The main dialogue box for the TWAIN Source will appear. Make any settings that you want, and put a check mark in the [Waiting Scan] checkbox. Note Putting a check mark in the [Waiting Scan] checkbox will allow you to start the actual scanning operation by pressing the [Start] key at the scanner. 2 Click on the [Connect] button in the main dialogue box and, once the connection to the scanner is made, click on the [Scan] button. When the scanner is starting or operating, connection may not be made. In this case, press [TWAIN] in the Select Scanner Function screen to select the TWAIN mode. 25