LG LRE3083BD Owners Manual - English Spanish - Page 16
Timer On/off, Rapid Preheat On Some, Models, Convection Auto Conversion, On Some Models
View all LG LRE3083BD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
features 15 ENGLISH TIMER ON/OFF The TIMER ON/OFF serves as an extra timer in the kitchen that will sound when the set time has run out. It does not start or stop cooking. The TIMER ON/OFF feature can be used during any of the oven control functions. Setting the Timer 1. To set hours and minutes: Press the TIMER ON/OFF button once. To set minutes and seconds: Press the TIMER ON/OFF button twice. 2. Use the number buttons to set the timer. For example, to set the timer for five minutes: Press the TIMER ON/OFF button once and then press the 5 button. 3. Press Timer or START button to start the timer. The time will count down and the time will show in the display. NOTE If TIMER ON/OFF or START button is not pressed, the timer will return to the time of day. 4. When the set time has run out, End will appear in the display. The indicator tones will sound every 15 seconds until TIMER ON/OFF is pressed. To Cancel the Timer 1. Press the TIMER ON/OFF button once. The display will return to the time of day. NOTE If the remaining time is not shown in the display, recall the remaining time by pressing the TIMER ON/OFF button. RAPID PREHEAT (ON SOME MODELS) The Rapid Preheat feature can preheat your oven up to 20% faster than the normal preheat function. Setting Rapid Preheat 1. Press the cook function button (ex. the BAKE button). 2. Using the number buttons, enter the cook time. 3. Press the START button 4. Press the RAPID PREHEAT button. CONVECTION AUTO CONVERSION (ON SOME MODELS) When cooking using convection cycle (Conv. bake and roast), the oven temperature is automatically reduced by 25°F. The display will show the changed temperature. This feature is called "AUTO CONVERSION". Your range comes with this feature "ENABLED". To DISABLE the auto conversion feature, follow below . 1. Press the SETTING button one time. "AUTO" will appear in the display. 2. Press the 1 button to ENABLE or press the 2 button to DISABLE. 3. Press the START button to accept the change.