LG LRE3083BD Owners Manual - English Spanish - Page 41

Removing the Drawer, Replacing the Drawer

Get LG LRE3083BD PDF manuals and user guides View all LG LRE3083BD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

40 care and cleaning Removing the Drawer WARNING Disconnect the electrical power to the range at the main fuse or circuit breaker panel. Failure to do so can result in severe personal injury, death, or electrical shock. Most cleaning can be done with the drawer in place; however, the drawer may be removed if further cleaning is needed. Use warm water to thoroughly clean. 1. Fully open the drawer. 2. Remove the two screws. Replacing the Drawer 1. Pull the bearing glides to the front of the chassis glide. 2. Align the glide on each side of the drawer with the glide slots on the range. 3. Push the drawer into the range until levers "click " (approximately 2 inch). 4. Pull the drawer open again to seat bearing glides into position. 5. Replace the two screws. Remove screws Remove screws 3. LPoucshatdeothwengolLindetevheleervleefrtognlideeaclhevLseiedrveaenrodf tphuelldurpawoenr.the right glide lever. Lever Push down with nger Lever Pull up with nger Push down with nger Pull up with nger 4. Pull the warming drawer away from the range.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
40
CARE AND CLEANING
Removing the Drawer
Disconnect the electrical power to the range at
the main fuse or circuit breaker panel. Failure to
do so can result in severe personal injury, death, or
electrical shock.
WARNING
Most cleaning can be done with the drawer in place;
however, the drawer may be removed if further cleaning
is needed. Use warm water to thoroughly clean.
1. Fully open the drawer.
2. Remove the two screws.
Remove screws
3.
Locate the glide lever on each side of the drawer.
Push down on the left glide lever and pull up on the
right glide lever.
Lever
Push down with finger
Pull up with finger
Lever
4.
Pull the warming drawer away from the range.
Replacing the Drawer
1.
Pull the bearing glides to the front of the chassis
glide.
2.
Align the glide on each side of the drawer with the
glide slots on the range.
3.
Push the drawer into the range until levers “click ”
(approximately 2 inch).
4.
Pull the drawer open again to seat bearing glides
into position.
5. Replace the two screws.