LG LRE3083BD Owners Manual - English Spanish - Page 20

ENGLISH using the cooktop 19 USING THE COOKTOP COOKING AREAS The cooking areas on your range are identified by permanent circles on the glass cooktop surface. For the most efficient cooking, fit the pan size to the element size. Pans should not extend more than 1/2 to 1-inch beyond the cooking area. When a control is turned on, a glow can be seen through the glass cooktop surface. The element will cycle on and off to maintain the preset heat setting, even on Hi. For Model: LRE3027, LRE3085 SINGLE WARM ZONE SINGLE DUAL DUAL Hot surface indicator HS (Hot Surface) will appear in the display once the element is turned off or during the self clean cycle. The HS indicator will stay on until the surface has cooled to approximately 150°F (66°C) or when the self clean cycle ends. CAUTION It is normal for the surface elements to cycle on and off during cooking, even at higher settings. This will happen more frequently if cooking on a lower temperature setting. Using the cooktop elements To turn on a SINGLE element SINGLE For Model: LRE3083 SINGLE WARM ZONE SINGLE DUAL SINGLE For Model: LRE3021 / LRE6321 SINGLE SINGLE DUAL SINGLE 1. Press the ON/OFF button that controls the element that you would like to use. 2. Press the + button once to adjust the element temperature to Hi, or the - button once to adjust the element temperature to Lo. 3. Use the - / + buttons to adjust the element tem- perature settings. The element temperature settings are adjustable at all times. 4. To turn off the element after cooking, press the ON/ OFF button once. NOTE • Hi is the highest temperature available. • Lo is the lowest temperature available. • Press and hold the + or - buttons to quickly scroll through the temperature settings.