Lenovo 9935B3U User Manual - Page 72

Disconnect

Get Lenovo 9935B3U - ThinkCentre A62 - 9935 PDF manuals and user guides
UPC - 884343247403
View all Lenovo 9935B3U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

1 Retainer ring 2 Ball 3 Plastic rollers 4 Ball cage To clean the non-optical mouse, do the following: Note: The following illustration might be slightly different from your mouse. 1. Turn off your computer. 2. Disconnect the mouse cable from the computer. 3. Turn the mouse upside down. Twist the retainer ring 1 to the unlocked position to remove the ball. 4. Place your hand over the retainer ring and ball 2 , and then turn the mouse right-side up, so that the retainer ring and ball fall out into your hand. 5. Wash the ball in warm, soapy water then dry it with a clean cloth. 6. Blow air carefully into the ball cage 4 to dislodge dust and lint. 7. Look for a buildup of dirt on the plastic rollers 3 inside the ball cage. This buildup usually appears as a stripe running across the middle of the rollers. 8. If the rollers are dirty, clean them by using a cotton swab soaked in isopropyl (rubbing) alcohol. Turn the rollers with your finger and continue swabbing them until all the dirt is removed. Be sure the rollers are still centered in their channels after you clean them. 9. Remove any fibers from the swab that might be remaining on the rollers. 10. Replace the ball and the retainer ring. Twist the retainer ring to the locked position. 11. Reconnect the mouse cable to the computer. 12. Turn your computer back on. 64 User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
±1²
Retainer
ring
±2²
Ball
±3²
Plastic
rollers
±4²
Ball
cage
To
clean
the
non-optical
mouse,
do
the
following:
Note:
The
following
illustration
might
be
slightly
different
from
your
mouse.
1.
Turn
off
your
computer.
2.
Disconnect
the
mouse
cable
from
the
computer.
3.
Turn
the
mouse
upside
down.
Twist
the
retainer
ring
±1²
to
the
unlocked
position
to
remove
the
ball.
4.
Place
your
hand
over
the
retainer
ring
and
ball
±2²
,
and
then
turn
the
mouse
right-side
up,
so
that
the
retainer
ring
and
ball
fall
out
into
your
hand.
5.
Wash
the
ball
in
warm,
soapy
water
then
dry
it
with
a
clean
cloth.
6.
Blow
air
carefully
into
the
ball
cage
±4²
to
dislodge
dust
and
lint.
7.
Look
for
a
buildup
of
dirt
on
the
plastic
rollers
±3²
inside
the
ball
cage.
This
buildup
usually
appears
as
a
stripe
running
across
the
middle
of
the
rollers.
8.
If
the
rollers
are
dirty,
clean
them
by
using
a
cotton
swab
soaked
in
isopropyl
(rubbing)
alcohol.
Turn
the
rollers
with
your
finger
and
continue
swabbing
them
until
all
the
dirt
is
removed.
Be
sure
the
rollers
are
still
centered
in
their
channels
after
you
clean
them.
9.
Remove
any
fibers
from
the
swab
that
might
be
remaining
on
the
rollers.
10.
Replace
the
ball
and
the
retainer
ring.
Twist
the
retainer
ring
to
the
locked
position.
11.
Reconnect
the
mouse
cable
to
the
computer.
12.
Turn
your
computer
back
on.
64
User
Guide