Lenovo PC 300GL Using your Personal Computer - PC300GL - 6561, 6591 - Page 88
Verify that the Configuration/Setup Utility Program correctly
View all Lenovo PC 300GL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
POST Message 601 602 604 Description A failure occurred during testing of the diskette drive and diskette-drive controller. This error can be caused by a loose or incorrectly connected cable, a failing drive, or a failing system board. Note: The computer can be used, but one or more diskette drives might not work. Action: Verify that all diskette drive cables are properly installed and securely connected. Running the diagnostic programs might isolate the diskette drive that failed, but you must have your computer serviced. (See "Diagnostic Programs" on page 97 for information about diagnostic programs provided with your computer.) The computer is not able to start the diskette in the drive. The diskette might be damaged or formatted incorrectly. Action: Try another startable diskette that is formatted correctly and is in good condition. (For information and instructions on formatting diskettes, refer to Understanding Your Personal Computer and your operating-system documentation.) If this does not correct the problem, have the computer serviced. A failure occurred during the testing of a diskette drive. Action: 1. Verify that the Configuration/Setup Utility Program correctly reflects the type of diskette drive you have installed. (For instructions on using the Configuration/Setup Utility Program, refer to Chapter 4, "Configuring Your Computer" on page 39.) 2. Run the diagnostic programs. (See "Diagnostic Programs" on page 97 for information about diagnostic programs provided with your computer.) 3. If the diagnostic programs detect a failure, replace the diskette drive. If the problem cannot be isolated and corrected, have the computer serviced. 74 Using Your Personal Computer