Lenovo PC 300GL Using your Personal Computer - PC300GL - 6561, 6591 - Page 89
Configuring Your Computer
View all Lenovo PC 300GL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
POST Message 662 1762 178X Description A diskette drive configuration error occurred. Action: 1. Verify that the Configuration/Setup Utility Program correctly reflects the number of diskette drives you have installed. (For instructions on using the Configuration/Setup Utility Program, refer to Chapter 4, "Configuring Your Computer" on page 39.) 2. If you installed or removed a diskette drive, you must save the new configuration in the Configuration/Setup Utility Program. Refer to the Important text box on page 40 for further information and instructions on saving the configuration. If this does not correct the problem, have the computer serviced. A hard disk configuration error occurred. Action: 1. Verify that the Configuration/Setup Utility Program correctly reflects the number of hard disk drives you have installed. (For instructions on using the Configuration/Setup Utility Program, refer to Chapter 4, "Configuring Your Computer" on page 39.) 2. If you added or removed a hard disk drive, you must save the new configuration in the Configuration/Setup Utility Program. Refer to the Important text box on page 40 for further information and instructions on saving the configuration. If the problem cannot be isolated and corrected, have the computer serviced. A failure occurred during testing of the hard disk drive or a primary or secondary IDE device. Action: 1. Run the diagnostic programs. (See "Diagnostic Programs" on page 97 for information about diagnostic programs provided with your computer.) 2. If the diagnostic programs detect a failure, replace the defective hard disk drive or primary or secondary IDE or EIDE device. If the problem cannot be isolated and corrected, have the computer serviced. Chapter 6. Solving Problems 75