Lexmark 11C0200 Service Manual - Page 48

Attendance Message 35 Res Save Off Deficient Memory Action The printer lacks the memory needed to enable Resource Save. This message usually indicates that too much memory is allocated for one or more of the printer link buffers. • To enable Resource Save after this message is displayed, either install additional memory or set each link buffer to the Auto value. • After you set all link buffers to Auto, exit the printer menus to activate link buffer changes. • When Ready is displayed, enable Resource Save in the Setup Menu and modify the link buffers again. • Press Go to clear the message. The printer automatically disables Resource Save and continues. 38 Memory Full The printer is processing data, but the memory used to store pages is full. Reduce the complexity of the page. • Simplify the print job by reducing the amount of text or graphics on a page. • Delete unnecessary downloaded fonts or macros. • Install additional memory. • Reduce the print resolution. Send the job to print again. Press Go to clear the message. The printer continues printing the job; however, some data may not print or may not print correctly. Or, to reset the printer: • Press to access the Busy menu. • Select Reset Printer. Diagnostic Information 2-13