Lexmark 11C0200 Service Manual - Page 93
Lexmark 11C0200 - Optra SC 1275 Color Laser Printer Manual
UPC - 734646126885
View all Lexmark 11C0200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Flash Test This test causes the file system to write and read data on the flash to test the flash device. The test destroys all data on the flash which is reformatted at the end of the test. Setting the Page Count Use this menu to reset the page count whenever you replace the engine card. The engine card contains the printer's NVRAM memory. When you select Page Count from the PRINTER SETUP menu, the current page count displays as follows: Page Count =1234567* The left-most digit (1 in this example) blinks, indicating it is the first digit to be changed. To change the value press Menu> or Menu< to get the value you want. Press Select to move to the next digit. To skip a digit (keep its current value) press Select. Press Select after the final digit to store the new page count in NVRAM. Viewing the Permanent Page Count The permanent page count setting cannot be changed through the control panel. It can only be viewed with the diagnostics menu. When you select Permanent Page Count the following screen displays: Perm Page Count =1234567* Viewing the Error Log The error log provides a history of printer errors. It contains the 12 most recent errors that have occurred in the printer. The most recent error displays in position 1, and the oldest error displays in position 12 (assuming 12 or more errors have occurred). If fewer than 12 errors have occurred, the oldest error displays in the position before the empty log entries begin. Empty log entries are identified with the 2-58