Lexmark 11C0200 Service Manual - Page 58

Attendance Message Change Action The media in the tray is a different size from the media detected by the paper size sensor, or it is different from the size that was set in the Paper Size or Paper Type menu items. The display shows the following information: On line 1, indicates where the printer expects the printed material to be. On line 2, one of the following items is displayed: Custom Type 1 through 3 is a userdefined name that was created with the MarkVision utility. The name is truncated to 16 characters. If the requested type matches the type currently in the tray, the paper size is displayed if you have not defined a custom type name. The name is truncated to 16 characters. The requested is other than a custom type. The type name is truncated to 9 characters. The requested of paper is displayed. The size name is truncated to 6 characters. • Load the requested size and type in the source. • If the source has auto-size sensing (tray 1 or tray 2), the printer automatically clears the message and continues processing the job. If the source does not have autosize sensing, press Go after loading the requested size. Or, to reset the printer: • Press to access the Busy menu. • Select Reset Printer. Diagnostic Information 2-23