Lexmark 11C0200 Service Manual - Page 55

Attendance Message 8X Scheduled Maintenance Action The following messages appear to alert you that certain assemblies need replacing: 80 - Fuser Assembly and Second Transfer Roll Assembly 81 - Transfer Belt Assembly Press Go to clear the message. The status of the two maintenance items listed above will be displayed in the User Maint Menu. The User Maint Menu will be active only if one or both maintenance items have expired. Once the items have expired, they should be replaced as soon as possible. After you have replaced the expired items, you must reset the appropriate maintenance message. 82 Waste Toner Bottle Missing The waste toner bottle is not installed or there is a problem with the toner collecting box detection switch (S6). Open the top door, install the waste toner bottle, and close the top door. The message clears from the display when the top door is closed. If it does not, go to the "Sensor Service Check" on page 2-47. 82 Waste Toner Bottle Full Open the top door, remove the full waste toner bottle. Replace the waste toner bottle and close the top door. The customer replaces this part at prescribed intervals. The message clears from the display when the top door is closed. If it does not, the toner full sensor (PC6) could be failing. Go to the "Sensor Service Check" on page 2-47. 2-20