Lexmark T630n Setup Guide - Page 29

4 Place the tips of the wire bail into the ends of the plastic bracket so that the wire bail curves downward. The wire bail rests in the printer output bin. 5 If you are not attaching any more print media handling options, attach the top cover to the high-capacity output stacker. Installing an output expander Warning: The output expander bin is designed to hold the weight of print media only. Excess weight may cause it to disengage from the support. Bin Labels Support Bracket and wire bail Note: If you have purchased a finisher or a high-capacity output stacker, that print media handling option must be installed directly on the printer, before the output expander. Each output expander consists of a support and a removable bin. A wire bail, bracket, and labels are also included. After you carefully unpack the output expander, install it immediately; otherwise, the edges of the mounting brackets could damage tabletops or fabrics. Set up the printer and print media handling options 24