Lexmark T630n Setup Guide - Page 39

Installing an optioncard, RS-232 Serial Interface Card

Get Lexmark T630n - Printer - B/W PDF manuals and user guides
UPC - 734646532211
View all Lexmark T630n manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Warning: Optional flash memory and firmware cards are easily damaged by static electricity. Touch something metal on the printer before you touch a card. Metal pins Plastic pins 1 Unpack the flash memory or firmware card. Avoid touching the metal pins on the bottom of the card. Save the packaging. Cards Note: The row of metal pins on the firmware card must be fully inserted along its entire length. 2 Holding the flash memory or firmware card by its sides, align the plastic pins on the card with the holes on the system board. If you are installing two cards, use the bottom system board connection first, and then the top one. 3 Push in until the flash memory or firmware card is firmly in place. Installing an option card Your printer has either one or two connectors that support the following option cards: • Hard disk with adapter card • MarkNet internal print server • RS-232 Serial Interface Card Install memory and option cards 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
34
Install memory and option cards
Warning:
Optional flash memory and firmware cards
are easily damaged by static electricity. Touch something
metal on the printer before you touch a card.
1
Unpack the flash memory or
firmware card.
Avoid touching the metal pins on
the bottom of the card. Save the
packaging.
2
Holding the flash memory or
firmware card by its sides, align
the plastic pins on the card with
the holes on the system board.
If you are installing two cards, use
the bottom system board
connection first, and then the top
one.
3
Push in until the flash memory or
firmware card is firmly in place.
Note:
The row of metal pins on the firmware card must be
fully inserted along its entire length.
Installing an option card
Your printer has either one or two
connectors that support the following
option cards:
•
Hard disk with adapter card
•
MarkNet internal print server
•
RS-232 Serial Interface Card
Plastic pins
Metal pins
Cards