Lexmark T630n Setup Guide - Page 45
Loading the 2000-sheet drawer, Load print media, Do not load any print
UPC - 734646532211
View all Lexmark T630n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Loading the 2000-sheet drawer Elevator button Follow these instructions to load the 2000-sheet drawer. Do not load any print media other than plain paper in the 2000-sheet drawer. 1 Open the loading door. If the elevator tray is not already in the lowered position, lower it by pushing the elevator button. Load line 2 Slightly bend the stack of paper as shown and place it on the elevator tray with the preferred print side facing down. Align the stack of paper to the back of the drawer. Carefully align each stack of paper as you load it to ensure a smooth edge where the stacks meet. Do not load paper above the load line. This illustration shows the correct orientation for loading paper for simplex printing. Letterhead paper should be loaded with the printed side face down and the page top against the front of the drawer. Do not mix weights of paper. For duplex printing on letterhead paper, place the printed side face up with the page top to the rear of the drawer. 3 Close the loading door. Load print media 40