Lexmark W812 Setup Guide - Page 33

Installing a memorycard, Install memory, firmware, or option cards, Publications

Get Lexmark W812 PDF manuals and user guides View all Lexmark W812 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Installing a memory card Follow the instructions in this section to install either a printer memory card or a flash memory card. Note: Some memory options offered for other Lexmark printers cannot be used with your printer. Refer to the Publications CD for memory specifications. The system board has two connectors for optional memory cards. You can install any combination of printer memory and flash memory cards. However, the printer only recognizes one flash memory card at a time. Warning! Memory cards are easily damaged by static electricity. Touch something metal on the printer before you touch a card. 1 Remove the system board access panel (see page 25). 2 Unpack the memory card. Avoid touching the connection points along the edge of the card. Save the packaging. 3 Push open the latches on both ends of the memory connector you want to use. 4 Align the notches on the bottom of the card with the notches on the connector. 5 Push the memory card firmly into the connector until the latches on either end of the connector snap into place. It may require some force to fully seat the card. 6 Make sure each latch fits over the notch on the end of the card. What do I do next? Task Install a firmware card Install an option card Reinstall the system board access panel Go to page... 28 30 32 Install memory, firmware, or option cards 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
27
Install memory, firmware, or option cards
Installing a
memory card
Follow the instructions in this section to
install either a printer memory card or a
flash memory card.
Note:
Some memory options offered for
other Lexmark printers cannot be used
with your printer. Refer to the
Publications
CD for memory
specifications.
The system board has two connectors
for optional memory cards. You can
install any combination of printer
memory and flash memory cards.
However, the printer only recognizes one
flash memory card at a time.
Warning!
Memory cards are easily
damaged by static electricity. Touch
something metal on the printer before
you touch a card.
1
Remove the system board access
panel (see page 25).
2
Unpack the memory card.
Avoid touching the connection
points along the edge of the card.
Save the packaging.
3
Push open the latches on both
ends of the memory connector
you want to use.
4
Align the notches on the bottom of
the card with the notches on the
connector.
5
Push the memory card firmly into
the connector until the latches on
either end of the connector
snap
into place.
It may require some force to fully
seat the card.
6
Make sure each latch fits over the
notch on the end of the card.
What do I do next?
Task
Go to page…
Install a firmware card
28
Install an option card
30
Reinstall the system board access panel
32