Lexmark W812 Setup Guide - Page 36
Installing an optioncard, RS-232C Serial/Parallel 1284-C
View all Lexmark W812 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Installing an option card Your printer has one option card slot that supports the following option cards: • Hard disk with adapter card • MarkNet internal print server • RS-232C Serial/Parallel 1284-C Interface Card Install a hard disk with adapter card to add additional storage space to your printer. Install an RS-232C Serial/Parallel 1284-C Interface Card to add a serial port or a parallel port. Install a MarkNet internal print server to add an Ethernet or Token-Ring port for connecting your printer to a network. Follow the instructions in this section to install your option card: 1 Remove the system board access panel (see page 25). 2 Remove the screw from the metal plate that covers the connector slot, and then lift the plate off. Save the screw. 30 Install memory, firmware, or option cards