Lexmark W812 Setup Guide - Page 34
Installing a firmwarecard, Avoid touching the metal pins
View all Lexmark W812 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Installing a firmware card Follow the instructions in this section to install an optional firmware card. The system board has one location to install a firmware card. Note: Firmware cards for other Lexmark printers cannot be used with this printer. 1 Remove the system board access panel (see page 25). Warning! Firmware cards are easily damaged by static electricity. Touch something metal on the printer before you touch a card. 2 Unpack the firmware card. Avoid touching the metal pins on the bottom of the card. Save the packaging. 3 Holding the card by its sides, align the pins on the card with the holes on the system board. 28 Install memory, firmware, or option cards
28
Install memory, firmware, or option cards
Installing a
firmware card
Follow the instructions in this section to
install an optional firmware card. The
system board has one location to install
a firmware card.
Note:
Firmware cards for other Lexmark
printers cannot be used with this printer.
1
Remove the system board access
panel (see page 25).
Warning!
Firmware cards are easily
damaged by static electricity. Touch
something metal on the printer before
you touch a card.
2
Unpack the firmware card.
Avoid touching the metal pins on
the bottom of the card. Save the
packaging.
3
Holding the card by its sides, align
the pins on the card with the holes
on the system board.