Lexmark W812 Setup Guide - Page 43
Step10: Verify printer setup, Turning on theprinter, Printing a menu settings
View all Lexmark W812 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Step 10: Verify printer setup Turning on the printer 1 Plug one end of the power cord into the socket at the back of the printer and the other end into a properly grounded outlet. 2 Turn on the printer. If the printer is attached locally (directly to a computer), leave the computer and any other attached devices turned off. You will turn these on in a later step. The message Performing Self Test appears on the operator panel display while the printer warms up. After the printer completes its internal tests, the Ready message indicates the printer is ready to receive jobs. If you see a message other than Ready, refer to the Publications CD for instructions on clearing the message. Click Printing, and then Understanding printer messages. Printing a menu settings page Utilities Menu 1 Menu 2 Select 3 Return 4 Go 5 Stop 6 Print a menu settings page to review the default printer settings and to verify that printer options are installed correctly. 1 Press Menu until you see Utilities Menu, and then press Select. 2 Press Menu until you see Print Menus, and then press Select to print the page. The message Printing Menus appears on the display. 3 Verify that the options you installed are correctly listed under "Installed Features." If an option you installed is not listed, turn the printer off, unplug the power cord, and reinstall the option. 4 Verify the amount of memory installed is correctly listed under "Printer Information." Verify printer setup 37