Lexmark W812 Setup Guide - Page 44
Printing a network setup Ready - drivers
View all Lexmark W812 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Note: For more information about using the operator panel and changing menu settings, refer to the Publications CD. 5 Verify that the paper trays are configured for the sizes and types of paper you loaded. 6 If you attached your printer to a network, continue with "Printing a network setup page" on page 38. Printing a network setup page If the printer is attached to a network, print a network setup page to verify the network connection. This page also provides important information that helps you configure for network printing. Note: If an optional MarkNet print server is installed, you see Print Net1 Setup on the display. 1 Press Menu until you see Utilities Menu, and then press Select. 2 Press Menu until you see Print Net Setup, and then press Select. The network setup page prints and the printer returns to Ready status. 3 Check the first section on the network setup page and confirm that Status is "Connected." If Status is "Not Connected," your LAN drop may not be active or your network cable may be malfunctioning. Consult your network support person for a solution, and then print another network setup page to verify the connection to your network. Save the network setup page for later use. What do I do next? Task Configure for TCP/IP Install printer drivers Go to page... 39 41 38 Verify printer setup